Twin Lobe Rotary compressor and Exhausters Product Description:- Twin Lobe Positive Displacement Type Rotary Compressor (Roots BlowerModel AEC-70.) Application:- Used in Alumina Refineries, Sponge Iron Plants, Steel Plants, used for Bulk Cargo Handling. Technical Specification:- Capacities up to 14000M 3 /Hr. at pressure of 0.5 bar. Air Cooled design with both side Bearings and Timing Gears Oil lubricated by splash, Vertical Flow . Key Attributes:- I) High Volumetric Efficiency . II) Lowe

Application : Pressure blowers provide air for Burners, Furnaces, High pressure process applications, Water treatment plants, Dairy, Ceramic plants, Textile plants and many Conveying system. Available in different arrangements and 8 discharge position to meet your needs and specification. TECHNICAL FEATURES Volume : 3,00-5,00 m3/hr Pressure : 100-1,200 mm WG

Product Specifications: * Water Jacketed End Plates * Suitable For Hight Pressures * Efficient Thermal Dissipation

Twin Lobe Blowers belongs to the family of positive displacement blowers. Universal Twin Blowers are available in 2 types Air Cooled series and Water Cool Series. They are available for a volumetric flow rate ranging from 8CFM (13.5 m3/hr) and 5079 cfm (8623 c.m.h.) pressure ranging up to 14.2 PSI (1kg/c.m.sq.) Universal water cool air blowers are very similar to the air cooled series in performance, except for the water jacket around them which contribute to the dissipation of the heat generated on account of high compression thereby maintaining tolerable temperature of all the blower compo

We are offering top quality blowers with secondary suction. These Blowers or Vacuum units are provided with special effective positive sealing and a double Lip seal at the outboard location. The unit can also be offered with direct coupled or V-belt drive. Some of its specifications are : •Flow Rate : 500 m3/hr to 28,000 m3/hr •Sizes / Models : 9 Sizes •Suitable For : For conveying of air & neutral gases.

Blowers We offer Blowers, which are fabricated from heavy gauge mild steel and stainless steel sheet. Impellers of our centrifugal blowers are of various designs to suit different applications and are dynamically balanced for stable and vibration free running. The blowers are fabricated in M.S, S.S, Aluminium etc. Our centrifugal blowers are equipped with corrosion resistant housing and wheel. These air blowers are available in both standards & customize basis.

* National blowers are design to give high efficiency performance * Impellers are dynamically and statically balanced * National blowers are made with steel plate fabricated construction * National blowers are available in direct V belt and coupling driver option * Special blowers are available for hot air temperature up to 500°C

Magnetic & Microwave Components: Delta's Voltage Controlled Oscillators (VCO) are available in Single, Dual, Triple and Quad band with frequency of up to 6 GHz. They are essential components in various cell phone systems, pagers, wireless gadgets, satellite communication equipment, VSATs, base stations and GPS. To provide precision quality in each products we utilize the latest in RF/Microwave engineering equipment from Agilent for testing and analyses. Production facilities as well are fitted with the most advanced surface mount systems, laser trimming systems, functional test system

Multiclone Fly Ash Collector

K.N. Manufactures a wide Range of Blowers as follows :- Type :Centrifugal Volume Range :4 to 3000 M3/Min Pressure Range :25 MM to 2500 MM W.G. Stages :Single/Twin/Multistage Motor Horse Power:0.5 H.P. to 150 H.P. Type of Driven :Direct Driven / V-Belt Driven / Coupling Driven K.N. Blowers incorporate the best concepts in centrifugal machinery designs to give high efficiency performance. These are combined with latest manufacturing technologies to minimize cost without sacrificing the sturdy and easy maintenance features for which K.N. blowers have acquired a strong reputation over the years. K.N. Blower are made with steel plate fabricated construction with fabricated construction with fabricated steel impellers, impellers are dynamically and statically balanced for minimum vibration. The blowers are available in direct, V-belt or coupling driven options.

We manufacturer centrifugal blower high pressure low capacity and low pressure high capacity based on clients requirement. Our blowers are hot start, means require small motor as compared to conventional blowers. So the running cost is low. MOC of blowers are MS and stainless steel. Capacity right from 100NM³/Hr to 50000 NM³/Hr. Out let pressure ranging from 100mmwc to 1000mmwc.

Blowers We manufacture our own make of FRP Centrifugal blowers in capacity range from 500 CMH to 60000 CMH and static heads ranging from 50 mm to 750 mm water column.

Blower: New Bharat Blowers are robust, welded, m.s. sheets & plates reinforced with angle iron frame. RANGE :- 0.5 HP to 20 HP, 3000 Rpm, with suitable pressure & CFM available on request. Construction Details: CASING :- Designed to obtain efficient pressure conversion. IMPELLER :- are fabricated from M.S. sheets & plates, forming in multi-blade type. We maintain clearance between casing & Impeller as to reduce air slippage, increase volumetric efficiency. Impellers are designed as per customer requirement for smooth operations, Impellers are dynamically as w

Industrial Centrifugal Blowers We can easily and efficiently manufacture single inlet, single width (SISW) configuration blowers. Their impellers are dynamically balanced to offer high efficiency & lower noise level. Made using raw materials like PP / FRP, FRP, PVC / FRP, FRB, FRVE and M.S. / FRP all these products cater to the needs of various industries. Technical Specifications: Capacity - 100 CFM to 50,000 CFM Static Pressure - 50 mmwg to 500 mmwg Motor Capacity - 0.5 HP to 50 HP Drive Type - Direct / Pulley - V Belt

Aarco Axial Fan Aarco Axial Flow Fans ranges from capacities of 300 CMH to 60,000 CMH. These are suitable for various applications for ventilation and exhaust purpose. The fan is equipped with cast aluminum with airfoil section blades which discharges powerful air stream with effective velocity. Fans can be supplied with flameproof motor and FRP lining.

Axial Flow Fan The LAWA Axial Flow Fan has been specially designed for removal of dust and fumes in work places where, due to long ducts, system-resistance is high and other conventional Exhaust Fans will not serve the purpose. This aerodynamically efficient fan is available in diameters from 12" through42", with direct drive capacities ranging to 29,000cfm. The LAWA axial fan housing is constructed of heavy duty welded steel and angle ring flanges, with a spark resistant, cast aluminum airfoil axial impeller. The basic functions of ventilation and air conditioning are effec

Air Conditioning Unit Assembly Air conditioning unit 'DX' type, with reputed made compressor and condenser coil Other accessories consists of copper tubing. LP/Hp switches, one charge of freon gas etc.

Axial Flow Fans: Axial Flow Fans are used to handle large quantities of air at relatively low pressures generally used in cement, chemical, textile, petrochemical, food processing, steel, plastic, paper, tea, pharmaceutical, rayon industries for blowing hot air or gases, industrial ventilation, humidification & exhaust fumes in sizes ranging from 300 mm to 2000 mm impeller diameter.