High Quality of Table Hinges with Brass Finish.

Specially designed range of table hinges we offer are used in drop leaf tables with rule joints. The extra wide plates of the hinges clear the hollows over the rounds on the molded edge, when the leaves are moved into position.

Packing: 100 pairs/ctn Dimension Diameter of cup: 35mm Thickness of cup: 11.5mm Material Steel Specification : Opening angle: 90 to 105.

Our range of slip on hinge euro is available in full overlay, half overlay and full inset along with maximum opening of 105 °. Our slip on hinge euro is offered in the following specifications: * Max. Shutter size - 34" x 22" (850 mm x 550 mm) for 2 hinges. * Shutter thickness - 16 to 19 mm * Shutter cavity ø35 mm; 12 mm deep. Cavity 4 mm from edge. * Finish – Nickel-plated. The cap is fitted in to the shutter cavity and screw on the hinge at right angles to the edge of the shutter. Mark holes in the cabinet for mounting plate and then these are assembled on the mounting plate. The shutter is aligned with the cabinet and on the hinge onto the mounting plate. This allows shutter to slide horizontally and also be pivoted for varying pressure.