He teeth material cobalt-allay with hardness reaching HRC68. The saw is suitable for cutting hard-grade wood and pencils. Its lifespan is longer, more than 5 times that of the ordinary frame saw.

We offer TT2800-E Precision Sliding Panel Saw(Cylindrical Rail) with following specifications: Sliding Table: 2800mm Max freely saw blade area: 2800x2800mm Motor: 3(4)KW Main Blade: 45mm RPM: 3000/4000/5000 Scoring Motor: 0.75KW Diameter of scoring saw spindle: 45mm Scoring Diameter: 120mm Scoring Blade RPM: 7000 Arbor Tilt: 0-90 Cut Length: 2800mm Gross Weight: 970KG. Feel free to mail us your requirement.

We offer Diamond Wire Saw For Mining And Quarrying with following specifications: Electric controlled inverter that allows a variable linear speed of the wire from 0m/s to 40 m/s, suitable for any quality or hardness of quarries, such as marble, granite, sandstone etc. also available for bridge, reinforced concrete and other construction cutting. With the feature of operation easily, short preparation, fast cutting speed and high efficiency. Diamond wire saw is composed of diamond beads which is stringed together with high strong steel wire. Diamond beads are produced coating diamond powder on the column steel rings by three types of technics: electroplating, sintering & vacuum brazing. Diamond beads are reinforced with rubber or plastic injection and also spring on the steel wire. The Diameter of Diamond wire saw is from 7.5mm to 11.5mm to fit all kind of application conditions: quarrying, cutting and profiling marble, granite, limestone, sandstone. Feel free to mail us your requirement.

FMC developed four models of band sawing machines especially for the sawing of structure steel. All the four models are developed for mitre cutting of profiles. Hydraulic tightening device can tighten the band so as to adjust the blade for cutting. Double-blade-guides been equipped: the first guide is fixed on one side of the profile, and the other is on the opposite side of the profile, this is mobile and its extension is hydraulically controlled. The blade-guide is equipped with a self-adjustable guiding system to keep the band teeth always perpendicular to the cutting section. Hydraulic vertical hold-downs that manually slide on prismatic guides. Two group hydraulic vices to clamp the profile while being cut at any degree. The sawing machine can be combined with a drilling system for two procedures in one continuous process. You can contact us if you want to order this product.